ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2653 > < Initial Inspection and Diagnostic Overview|Page 2651
Page 3
background image

The HS-CAN network operates at a maximum data transfer speed of 500 Kbps and is designed for real time information transfer and control. The
network will remain operational, but at a degraded level when certain circuit faults are present. The HS-CAN network may remain operational with
only one termination resistor present.

The following modules are on the HS-CAN network:
-

Powertrain control module (PCM)

-

Transmission control module (TCM)

-

Anti-lock brake system (ABS) module

-

Restraints control module (RCM)

-

Occupant classification sensor module

-

Instrument cluster

-

Four wheel drive (4WD) control module (if equipped)

HS-CAN Network Communication Fault Chart

The fault chart describes the specific HS-CAN network failures and their resulting symptom.

Initial Inspection and Diagnostic Overview|Page 2653 > < Initial Inspection and Diagnostic Overview|Page 2651