Fusion FWD L4-2.5L Hybrid (2010)
Battery, Hybrid Drive: Service and Repair
High-Voltage Traction Battery
High-Voltage Traction Battery
Removal and Installation
WARNING: To prevent the risk of high-voltage shock, always follow precisely all warnings and service instructions, including instructions to
depower the system. The high-voltage hybrid system utilizes approximately 300 volts DC, provided through high-voltage cables to its
components and modules. The high-voltage cables and wiring are identified by orange harness tape or orange wire covering. All high-voltage
components are marked with high-voltage warning labels with a high-voltage symbol. Failure to follow these instructions may result in serious
personal injury or death.
1. Depower the High Voltage Traction Battery (HVTB). For additional information, refer to High-Voltage Traction Battery Systems Depowering
See: Service and Repair/High-Voltage Traction Battery Systems Depowering.
2. Fold the RH backrest down.
-
Between the HVTB and the sheet metal, locate the seat backrest latch release lever.
-
Push the release lever toward the outboard side of the vehicle and fold the backrest down.