Fusion FWD L4-2.5L Hybrid (2010)
Battery Temperature Sensor/Switch: Service and Repair
High-Voltage Traction Battery Inlet Air Temperature Sensor
Removal and Installation
1. Remove the 4 pin-type retainers and the trunk front cover.
2. NOTE: If the center safety belt retractor locks and the safety belt webbing prevents the 60 percent backrest from lowering, raise the backrest
upward to release the safety belt retractor and belt webbing.
Fold the LH backrest down.
-
Between the High Voltage Traction Battery (HVTB) and the sheet metal, locate the seat backrest latch release lever.
-
Push the release lever toward the outboard side of the vehicle and fold the backrest down.
