Fusion FWD L4-2.5L Hybrid (2010)
-
Are the resistances less than 5 ohms?
Yes
CONNECT the negative battery cable. GO to AC53.
No
REPAIR the circuit in question. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the network test with the scan tool.
-------------------------------------------------
AC8 CHECK THE MS-CAN CIRCUITS BETWEEN THE IPC AND THE DLC FOR AN OPEN
-
Disconnect: Instrument Panel Cluster (IPC) C220 .
-
For gasoline engine, measure the resistance between the IPC C220-12, circuit VDB06 (GY/OG), harness side and the DLC C251-3, circuit
VDB06 (GY/OG), harness side.
-
For gasoline engine, measure the resistance between the IPC C220-13, circuit VDB07 (VT/OG), harness side and the DLC C251-11, circuit
VDB07 (VT/OG), harness side.
-
For hybrid engine, measure the resistance between the IPC C220-2, circuit VDB06 (GY/OG), harness side and the DLC C251-3, circuit VDB06
(GY/OG), harness side.
-
For hybrid engine, measure the resistance between the IPC C220-1, circuit VDB07 (VT/OG), harness side and the DLC C251-11, circuit VDB07
(VT/OG), harness side.
