Fusion FWD L4-2.5L Hybrid (2010)
Engine Control Module: All Technical Service Bulletins
Engine Controls - MIL ON/DTC P0111 Set
TSB 10-4-1
03/15/10
SERVICE ENGINE SOON LAMP ILLUMINATED -
DIAGNOSTIC TROUBLE CODE (DTC) P0111 - INTAKE
AIR TEMPERATURE SENSOR
RANGE/PERFORMANCE
FORD:
2010 Fusion
MERCURY:
2010 Milan
ISSUE
Some 2010 Fusion and Milan Hybrid vehicles built on or before 11/30/2009 may exhibit the Service Engine Soon lamp illuminated, accompanied by
DTC P0111 for Intake Air Temperature Sensor Range/Performance.
ACTION
Reprogram the powertrain control module (PCM) to the latest calibration using IDS release 65.06 and higher. This new calibration is not included in the
VCM 2010.1 DVD. Calibration files may also be obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
100401A
2010 Fusion Hybrid, Milan
0.3 Hr.
Hybrid: Check DTCs And
Reprogram The Powertrain
Control Module (Do Not
Use With Any Other Labor
Operations)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
RECALEM
04
Disclaimer