ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3023 > < Initial Inspection and Diagnostic Overview|Page 3021
Page 54
background image

Yes

GO to R32.

No

GO to R33.

-------------------------------------------------
R32 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE AUDIO DSP MODULE
DISCONNECTED

-

Disconnect: Audio DSP Module C4326c.

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Are the resistances greater than 1,000 ohms?

Yes

CONNECT the negative battery cable. GO to R50.

No

GO to R33.

-------------------------------------------------
R33 VERIFY VEHICLE EQUIPMENT - HVAC MODULE

-

Inspect the vehicle for an HVAC module.

-

Is the vehicle equipped with an HVAC module?

Yes

GO to R34.

No

GO to R35.

-------------------------------------------------
R34 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE HVAC MODULE
DISCONNECTED

-

Disconnect: HVAC Module C228a (Single-Zone) or C2356a (Dual-Zone).

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Are the resistances greater than 1,000 ohms?

Yes

CONNECT the negative battery cable. GO to R51.

Initial Inspection and Diagnostic Overview|Page 3023 > < Initial Inspection and Diagnostic Overview|Page 3021