ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3047 > < Initial Inspection and Diagnostic Overview|Page 3045
Page 78
background image

GO to T22.

-------------------------------------------------
T22 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE ABS MODULE DISCONNECTED

-

Disconnect: ABS Module C135.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and ground; and between the DLC C251-14, circuit
VDB05 (WH), harness side and ground.

-

Are the resistances greater than 1,000 ohms?

Yes

CONNECT the negative battery cable. GO to T32.

No

GO to T23.

-------------------------------------------------
T23 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE TCM DISCONNECTED

-

Disconnect: Transmission Control Module (TCM) C2352b (FNR5 Transaxle).

-

Disconnect: TCM C1533 (Aisin AW21 Transaxle).

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Are the resistances greater than 1,000 ohms?

Yes

CONNECT the negative battery cable. GO to T33.

No

GO to T24.

-------------------------------------------------
T24 VERIFY VEHICLE EQUIPMENT - 4X4 CONTROL MODULE

-

Inspect the vehicle for a 4X4 control module.

-

Is the vehicle equipped with a 4X4 control module?

Yes

GO to T25.

No

GO to T26.

-------------------------------------------------
T25 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE 4X4 CONTROL MODULE

Initial Inspection and Diagnostic Overview|Page 3047 > < Initial Inspection and Diagnostic Overview|Page 3045