ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Power Steering Line/Hose: > < Power Steering Fluid Reservoir|Service and Repair
Page 1
background image

Power Steering Line/Hose: Customer Interest
Steering - Grunting Noise On Low Speed Turns

TSB 10-23-4

12/03/10

3.5L ENGINE - STEERING GRUNT NOISE - BUILT 
FROM 8/1/2009 TO 4/28/2010

FORD:
2010 Fusion

LINCOLN:
2010 MKZ

ISSUE
Some 2010 Fusion Sport and MKZ vehicles equipped with 3.5L engine and built from 8/1/2009 to 4/28/2010 may exhibit a steering grunt noise when
turning the wheel left or right at low speed or at a stand still position.

ACTION
Follow the Service Procedure steps to correct the condition.

SERVICE PROCEDURE

1. Replace the power steering pump to steering gear pressure line with the revised tubing design. Refer to Workshop Manual (WSM), Section 211-02.

2. The new line comes with new copper washers. Discard the old washers.

3. It is critical to follow the purge procedure outlined in WSM, Section 211-00 to properly purge the power steering system of air.

Parts Block

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage 
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.

OPERATION

DESCRIPTION

TIME

102304A

2010 Fusion, MKZ, 3.5L:

2.0 Hrs.

Replace The Power
Steering To Pump Steering
Gear Pressure Line(Do Not
Use With Any Other Labor
Operation)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

3A719

38

Disclaimer

All Technical Service Bulletins for Power Steering Line/Hose: > < Power Steering Fluid Reservoir|Service and Repair