Fusion FWD V6-3.5L (2010)
7. Install the 4 rear toe link bracket nuts.
-
Tighten to 90 Nm (66 lb-ft).
8. Install the shock absorber lower bolt and flagnut.
-
Tighten to 115 Nm (85 lb-ft).
9. Position the ABS wheel speed sensor and install the bolt.
-
Tighten to 23 Nm (17 lb-ft).
10. Fill the axle with the specified quantity of the specified lubricant.
11. Install the wheel and tire. For additional information, refer to Wheels and Tires.