Ford Workshop Service and Repair Manuals

Flange Holding Wrench, Universal

205-072 (15-030 A)

1. Remove the accessory drive belt. For additional information, refer to Section  303-05 Accessory Drive.

2. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

3. Remove the engine undershield.

4. Detach the air charge cooler pipe and position to one side.

5. Using the special tool to prevent the power steering pump pulley from rotating, remove the power steering pump pulley retaining bolts.

6. Remove the power steering pump pulley.

1. To install, reverse the removal procedure.