Removal and Installation Removal | -
Using a 9 mm Allen key to prevent the power steering pump pulley from rotating, remove the power steering pump pulley. | | -
Detach the power steering pump from the mounting bracket. | | -
Remove the power steering line support bracket retaining bolt. | | -
Remove the power steering line. - Discard the sealing washers.
- Allow the fluid to drain into a suitable container.
| | -
Remove the power steering hose. - Allow the fluid to drain into a suitable container.
| | -
Remove the power steering pump. | Installation | -
CAUTION:Install new sealing washers to the power steering line union. To install, reverse the removal procedure. | | |