ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Key Release Cable > < Steering Column Multifunction Switch
Steering Column Switches - Ignition Switch Galaxy 2000.75 (04/2000-02/2006)
Removal and Installation

Removal

  1. Remove the steering wheel. For additional information, refer to Section  211-04 Steering Column.

  1. Detach the steering column upper shield from the steering column lower shield.

  1. Remove the steering column upper shroud.

  1. Remove the steering column lower shroud.

  1. Disconnect the ignition switch electrical connector.

  1. Remove the ignition switch.
    1. Remove the ignition switch retaining screws.
    1. Remove the ignition switch.

Installation

  1. To install, reverse the removal procedure.

Key Release Cable > < Steering Column Multifunction Switch