Removal and Installation Removal | -
Disconnect the hood latch release cable from the hood latch. | | -
Remove the battery junction box (BJB) retaining screws. | | -
Remove the battery side trim cover. | | -
Disconnect the cooling fan motor electrical connectors. | | -
Detach the refrigerant line from the cooling fan motor and shroud. | | -
Detach the cooling fan motor electrical connectors from the cooling fan shroud. | | -
Remove the right-hand cooling fan motor. | | -
Remove the left-hand cooling fan motor. | Installation | -
To install, reverse the removal procedure. | | |