Removal and Installation Removal | -
Remove the engine undershield. | | -
Disconnect the vehicle speed sensor (VSS) electrical connector. | | -
Disconnect the crank position (CKP) sensor electrical connector. | | -
Disconnect the oil pressure switch electrical connector. | | -
Remove the air cleaner outlet pipe. | | -
Disconnect the throttle position (TP) sensor electrical connector. | | -
Disconnect the intake air control (IAC) valve electrical connector. | | -
Disconnect the fuel injector electrical connectors. | | -
Disconnect the ignition coil suppressor electrical connector. | | -
Disconnect the ignition coil pack electrical connector. | | -
Disconnect the engine coolant temperature (ECT) sensor electrical connector. | | -
Disconnect the ECT sensor electrical connector. | | -
Disconnect the camshaft position (CMP) sensor electrical connector. | | -
Disconnect the reverse light switch electrical connector. | | -
Detach the fuel charging wiring harness from the battery tray. | | -
Remove the fuel charging wiring harness - Disconnect the fuel charging wiring harness electrical connector.
| Installation | -
To install, reverse the removal procedure. | | |