Removal and Installation Special Tool(s) | Socket, Fuel Tank Sender Unit 310-056 (23-048) | Removal WARNING:Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable mixtures are always present and may ignite. Failure to follow these instructions may result in personal injury. | -
Remove the rear scuff plate trim panel. | | -
Remove the seat anchor trim covers. | | -
Remove the floor console register cover. | | -
Remove the floor console register. | | -
Detach the floor covering (both sides). | | -
Remove the rear floor covering through the liftgate aperture. | | -
Remove the seat base retaining anchor rail. | | -
Remove the fuel pump module access cover. | | -
Disconnect the fuel pump module electrical connector. | | -
Using the special tool, remove the fuel pump module. | Installation | -
To install, reverse the removal procedure. | | |