ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Clutch and Clutch Field Coil > < Air Conditioning (A-C) Compressor - 2.0L-2.3L
Air Conditioning - Air Conditioning (A/C) Compressor—2.8L Galaxy 2000.75 (04/2000-02/2006)
Removal and Installation

Removal

  1. Drain the air conditioning system. For additional information, refer to Section  412-00 Climate Control System - General Information.
  1. Remove the accessory drive belt. For additional information, refer to Section  303-05 Accessory Drive.

  1. Disconnect the A/C compressor clutch electrical connector.

  1. Remove the refrigerant line support bracket retaining bolt.

  1. CAUTION:
    CAUTION:Cap the refrigerant lines and the A/C compressor to prevent dirt ingress.
    Disconnect the refrigerant lines from the A/C compressor.
    • Discard the O-ring seals.

  1. Remove the A/C compressor.

Installation

  1. NOTE:
    NOTE:Install new refrigerant line O-ring seals.
    NOTE:
    NOTE:Coat the refrigerant line O-ring seals in clean refrigerant oil prior to installation.
    To install, reverse the removal procedure.

Clutch and Clutch Field Coil > < Air Conditioning (A-C) Compressor - 2.0L-2.3L