| Removal and Installation Removal | | -
Evacuate the air conditioning (A/C) system.
For additional information, refer to: Klimaanlage entleeren, evakuieren und befüllen (412-00, General Procedures).
| | | -
Disconnect the hood latch release cable from the hood latch. | | | -
Detach the compressor outlet line to the condenser from the radiator | | | -
CAUTION:Seal off the refrigerant line to prevent entry of dirt. Detach the outlet line of the compressor to the condenser from the refrigerant outlet line of the A/C compressor. | | | -
Remove the cover of the front bumper.
For additional information, refer to: Abdeckung - vorderer Stoßfänger (501-19, Removal and Installation).
| | | -
CAUTION:Close off the condenser to prevent dirt ingress. Remove the outlet line of the compressor to the condenser. | Installation | | -
NOTE:Install new refrigerant line O-rings. NOTE:Coat the refrigerant line O-rings with clean refrigerant oil before installation. Install the components in reverse order. | | |
