Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Front Side Member and Fender Apron Panel RH >
< Front Crossmember
Ikon 1999 (01.2000-)
Body and Paint
5 Body and Paint / 501 Body and Paint
501-27 Front End Sheet Metal Repairs / Removal and Installation
Front Side Member Section
Front End Sheet Metal Repairs - Front Side Member Section
Ikon 1999 (01/2000-)
Removal and Installation
General Equipment
Measuring - or Straightening System
Materials
Name
Specification
Longitudinal Member - Section
Removal
General Information
The hood latch panel and fender apron section must be removed before the start of repair.
Note the shape of replacement parts.
The cutting area varies depending on damage.
Longitudinal Member Inner Side
Cut.
CAUTION:
The cut in the longitudinal member lock panel must be offset towards the front in relation to the cut in the longitudinal member.
Longitudinal Member Outer Side
Cut.
Installation
General Information
Tack new part in several places before welding.
Produce a continuous MIG weld seam with interruption.
Longitudinal Member Inner Side
Produce a continuous MIG weld seam.
Longitudinal Member Outer Side
Produce a continuous MIG weld seam.
Spot weld.
Support
Spot weld.
Body and Paint
5 Body and Paint / 501 Body and Paint
501-27 Front End Sheet Metal Repairs / Removal and Installation
Front Side Member Section
Front Side Member and Fender Apron Panel RH >
< Front Crossmember