Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Voltage Regulator >
< Generator - 1.3L Duratec-8V (Rocam)-1.6L Duratec-8V (Rocam)
Ikon 1999 (01.2000-)
Mechanical Repairs
4 Electrical
414 Battery and Charging System
414-02 Generator and Regulator / Diagnosis and Testing
Removal and Installation
Generator Pulley
Generator and Regulator - Generator Pulley
Ikon 1999 (01/2000-)
Removal and Installation
General Equipment
8mm Allen key
Removal
Remove the generator.
For additional information, refer to
Generator - 1.3L Endura E
/
Generator - 1.6L
/
Generator - 1.8L Diesel
in this section.
Remove the generator pulley.
Hold the center shaft with an 8mm Allen Key.
Installation
NOTE:
Inspect center shaft for damage.
NOTE:
Make sure that the center shaft of the generator does not turn when tightening the generator pulley retaining nut
To install, reverse the removal procedure.
Mechanical Repairs
4 Electrical
414 Battery and Charging System
414-02 Generator and Regulator / Diagnosis and Testing
Removal and Installation
Generator Pulley
Voltage Regulator >
< Generator - 1.3L Duratec-8V (Rocam)-1.6L Duratec-8V (Rocam)