ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Disassembly and Assembly > < Front Seat

Ikon 1999 (01.2000-)

Seating - Rear Seat Cushion Ikon 1999 (01/2000-)
Removal and Installation

Removal
  1. Remove the rear seat backrest retaining nuts from inside the luggage compartment.

  1. Remove the rear seat backrest.

  1. Remove the rear seat cushion.
    1. Detach the front retaining clips.
    1. Detach the rear locating loop from the floor panel bracket.

Installation
  1. NOTE:
    NOTE:Make sure the front clips are fully located in the floor panel bracket.
    Install the rear seat cushion.
    1. Install the retaining clips into the floor panel.
    1. Install the rear of the seat cushion into the floor panel bracket.
    1. Install the front of the cushion.

  1. CAUTION:
    CAUTION:Make sure the rear seat backrest locating brackets are correctly positioned on the rear seat cushion brackets.
    Attach the rear seat backrest.

  1. Install the rear seat backrest.
    • Install the retaining nuts.

Disassembly and Assembly > < Front Seat