ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Windshield Washer Reservoir > < Windshield Wiper Motor

Ikon 1999 (01.2000-)

Wipers and Washers - Windshield Washer Pump Ikon 1999 (01/2000-)
Removal and Installation

Removal

  1. Undo the right-hand front wheel nuts.
  1. Raise the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.
  1. Detach the right-hand front wheel.

  1. Remove the wheelhouse cover.

  1. Remove the washer pump.
    1. Disconnect the hoses and drain the washer reservoir.
    1. Disconnect the plug.
    • Pull out the washer pump (push fit).
    • Remove the rubber grommet from the washer reservoir.

Installation

  1. NOTE:
    NOTE:Coat the rubber grommet with soap solution before fitting it.
    Refit the components in reverse order.

  1. Install the wheelhouse cover.

  1. Fit the front wheel.
    • Lower the vehicle.
  1. Fill up the washer reservoir.
  1. Check the operation of the washer system.

Windshield Washer Reservoir > < Windshield Wiper Motor