ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
3 Powertrain > < Steering Column Multifunction Switch

Ka 1997 (09.1996-)

Steering Column Switches - Ignition Switch Ka 1997 (09/1996-)
Removal and Installation

Removal

  1. Disconnect the battery ground cable. For additional information, refer to Section  414-01 Battery, Mounting and Cables.

  1. Remove the steering column shrouds.
    1. Remove the upper shroud.
    1. Remove the lower shroud.

  1. Disconnect the ignition switch electrical connector.

  1. Remove the ignition switch.
    • Release the retaining clips.

Installation

  1. To install, reverse the removal procedure.

3 Powertrain > < Steering Column Multifunction Switch