Ford Ka Workshop Service and Repair Manuals

Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

Disconnect and detach the fuel charging wiring harness from the retaining bracket.

Lower the vehicle.

Remove the air cleaner. For additional information, refer to Section  303-12 Intake Air Distribution and Filtering.

Remove the throttle body.
For additional information, refer to Throttle Body - in this section.

Disconnect the idle air control (IAC) valve and the T-MAP sensor electrical connectors. (intake manifold shown removed for clarity).

Detach the fuel charging wiring harness from the fuel injection supply manifold.

Disconnect the fuel injector electrical connectors.

Remove the fuel charging wiring harness through the intake manifold, where the throttle body was installed.

To install, reverse the removal procedure.