| Description and Operation The windshield consists of: - standard plastic and glass laminate safety glass.
- a window opening flange bonded with urethane adhesive.
The liftgate window consists of: - a standard plastic and glass laminate safety glass.
- a heated window grid wire.
- two liftgate window glass hinges.
- two liftgate lifting cylinder anchors.
- a window wiper motor and arm.
- a striker.
The front door window consists of: - a standard plastic and glass laminate safety glass.
- a manual window regulator crank handle (if equipped).
- a window control switch (if equipped).
- a window regulator assembly, which consists of:
- a manual window regulator. - a power window regulator and motor. The rear door window glass consists of: - a standard plastic and glass laminate safety glass.
- a manual window regulator crank handle (if equipped).
- a window control switch (if equipped).
- a window regulator assembly, which consist of:
- a manual window regulator. - a power window regulator and motor. The rear quarter window consists of: - a standard plastic and glass laminate safety glass.
- a window opening flange with urethane adhesive.
The window control switch: - is located on each door trim panel.
- may be used to raise or lower both passenger side and driver side windows from the window control switch on the driver door.
- includes a window lock feature that is controlled through the window control switch on the driver door.
- has illumination on LHD (left-hand drive) vehicles. When the window lock feature is activated, illumination will be turned off on all of the passenger switches, leaving only the driver switch illumination. For additional information, refer to Section 413-00 Instrument Cluster and Panel Illumination.
| 