ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Customer Interest:|85519 > < Engine - Hesitation/Low Power/Stalling/Knocking
Page 1
background image

Engine Control Module: Customer Interest
Engine - Cold Engine Knock

Article No. 85-6-9

ENGINE KNOCK - 3.8L CFI - COLD

FORD 1984-85 LTD, THUNDERBIRD

LINCOLN-MERCURY 1984-85 MARQUIS, COUGAR

CALIBRATIONS: All with CFI

WARNING:

This modification is authorized only for the listed engines. Performing this modification on other engine calibrations is unauthorized and
could create liability under applicable federal or local laws.

Engine cold knock during the first mile of operation is a nondestructive piston slap noise caused by cold start spark advance to improve cold driveaway.
Service by installing a new processor and setting initial timing to 10~ BTDC.

1.

Check the initial timing and set to 10~ BTDC.

2.

Replace the EEC processor with E53Z-12A650- ANB (49 State) or E53Z-12650-APB (California).

3.

Install a Ford Authorized Modification Decal denoting the changes.

Authorized Modifications decal

Obtain an Authorized Modifications decal and list the date, dealer number and summary of alterations performed. Select a prominent place adjacent to
the Vehicle Emission Control Information decal suitable for installing the Authorized Modifications decal. Clean the area, install the decal and cover it
with a clear plastic decal shield.
PART NUMBER

PART NAME

CLASS

E53Z-12A650-ANB

Processor (49 State)

R

E53Z-12A650-APB

Processor (California)

W

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP12650C84
TIME:

0.5 Hr. DLR. CODING: Basic Part No. DRIVE - Code: 56

Customer Interest:|85519 > < Engine - Hesitation/Low Power/Stalling/Knocking