| Removal and Installation Special Tool(s) | | Remover/Installer, Bushing, Lower Arm 204-168 (14-043) | | | Installer, Crankshaft Oil Seal 303-395 (21-171) | | | Adapter for 205-342 205-342-02 (15-110-02 | | | Remover Installer, Crankshaft Bearing 303-433 (21-185) | Materials Name Specification Shim — differential, driving gear bearing 1.1 mm 91ZT-4548-XA - Removal All vehicles Vehicles built up to 08/1996 | | -
Using the special tool, remove the front and rear bushings. | Vehicles built 08/1996 onwards | | -
Using the special tool, remove the front bushing. | | | -
Using the special tools, remove the rear bushing. | Installation Vehicles built up to 08/1996 | | -
CAUTION:Make sure the nipples on the rear bush are in line with the triangular alignment marks on the arm. Position the lower arm bushings on the lower arm. - Position the front solid bushing.
- Position the rear voided bushing.
| | | -
NOTE:The special tool installs the bushings to the correct depth. Using the special tool, install the front and rear bushings. | Vehicles built 08/1996 onwards | | -
NOTE:The special tool installs the bushing to the correct depth. Using the special tool, install the front bushing. | | | -
CAUTION:The shim is used for the correct depth of the bushing and must be removed when the bushing is installed. Install the rear bushing. - Install the shim (refer to materials table).
- Using the special tools install the rear bushings.
| All vehicles | | -
Install the lower arm assembly. | |
