ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Water Pump - 1.8L Diesel > < Water Pump - Vehicles Built Up To: 05-1998 1.6L-1.8L-2.0L

Mondeo 1997 (08.1996-09.2000)

Engine Cooling - Water Pump—2.5L Mondeo 1997 (08/1996-09/2000)
Removal and Installation

Special Tool(s)

Remover/Installer, Cooling Hose Clamp

303-397 (24-003)

Removal

  1. Drain the cooling system.
    For additional information, refer to Cooling System Draining, Filling and Bleeding in this section.

  1. Using the special tool, disconnect the coolant hose from the water pump.
  1. Lower the vehicle.
  1. Remove the air cleaner. For additional information, refer to Section  303-12 Intake Air Distribution and Filtering.
  1. Remove the water pump drive belt. For additional information, refer to Section  303-05 Accessory Drive.

  1. Using the special tool, disconnect the coolant hose from the cylinder head.

  1. Using the special tool, disconnect the coolant hose from the thermostat housing.

  1. Remove the water pump drive belt tensioner.

  1. Remove the water pump.

Installation

  1. To install, reverse the removal procedure.

Water Pump - 1.8L Diesel > < Water Pump - Vehicles Built Up To: 05-1998 1.6L-1.8L-2.0L