Removal and Installation Removal | -
Disconnect the actuating cable from the throttle quadrant. | | -
Remove the throttle cable from the throttle bracket. - Remove the cable from the throttle bracket.
- Push the retaining clip from the throttle bracket and pull the cable out.
| | -
Remove the actuator multiplug. | | -
Remove the actuator retaining bolt. | | -
Disengage the actuator locating pins. | | -
Remove the cable cap from the actuator. - Depress and hold the locking clip.
- Turn the cap anticlockwise.
| | -
Remove the cable from the actuator pulley. - Gently release the cable locking spring.
- Push the cable end out of the pulley slot.
| Installation | -
Refit the components in reverse order. | | |