ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Water Pump - 2.0L Duratorq-Di-TDDi (Puma) Diesel-2.0L Duratorq-TDCi (Puma) Diesel-2.2L Duratorq-TDCi (Puma) Diesel > < Thermostat - 2.0L Duratorq-Di-TDDi (Puma) Diesel-2.0L Duratorq-TDCi (Puma) Diesel-2.2L Duratorq-TDCi (Puma) Diesel

Mondeo 2001 (10.2000-02.2007)

Engine Cooling - Water Pump—2.5L Duratec-VE (VE6)/3.0L Duratec-SE (VE6)/3.0L Duratec-ST (VE6) Mondeo 2001 (10/2000-02/2007)
Removal and Installation

Removal

  1. Disconnect the battery ground cable. For additional information, refer to Section  414-01 Battery, Mounting and Cables.
  1. Remove the air cleaner. For additional information, refer to Section  303-12 Intake Air Distribution and Filtering.
  1. Remove the thermostat housing.
    For additional information, refer to Thermostat - Vehicles with 2 in this section.

  1. Remove the water pump drive belt.
    • Rotate the water pump drive belt tensioner clockwise.

  1. Remove the water pump retaining bolts.

  1. Disconnect the coolant hose from the water pump.

  1. Disconnect the heater hose and remove the water pump and coolant hose assembly.

  1. Remove the coolant hose from the water pump.

Installation

  1. To install, reverse the removal procedure.

Water Pump - 2.0L Duratorq-Di-TDDi (Puma) Diesel-2.0L Duratorq-TDCi (Puma) Diesel-2.2L Duratorq-TDCi (Puma) Diesel > < Thermostat - 2.0L Duratorq-Di-TDDi (Puma) Diesel-2.0L Duratorq-TDCi (Puma) Diesel-2.2L Duratorq-TDCi (Puma) Diesel