ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Throttle Body - 3.0L Duratec-ST (VE6) > < Fuel Charging and Controls

Mondeo 2001 (10.2000-02.2007)

Fuel Charging and Controls - 2.5L Duratec-VE (VE6)/3.0L Duratec-SE (VE6)/3.0L Duratec-ST (VE6) - Throttle Body—2.5L Duratec-VE (VE6)/3.0L Duratec-SE (VE6) Mondeo 2001 (10/2000-02/2007)
Removal and Installation

Removal
  1. Remove the air cleaner outlet tube.
    1. Disconnect the intake air bypass hose.
    1. Disconnect the positive crankcase ventilation (PCV) hoses.
    1. Detach the air cleaner outlet tube retaining clips.

  1. Remove the engine cover.

  1. Detach the wiring harness from the throttle body and disconnect the throttle position (TP) sensor electrical connector.

  1. Disconnect the accelerator cable from the throttle body and remove the accelerator cable retaining clip.

  1. Detach the accelerator cable bracket.

  1. Remove the throttle body.
    • Discard the gasket.

Installation

  1. NOTE:
    NOTE:Install a new gasket.
    To install, reverse the removal procedure.

Throttle Body - 3.0L Duratec-ST (VE6) > < Fuel Charging and Controls