ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
303-13 Evaporative Emissions > < Air Cleaner Intake Pipe - 3.0L Duratec-ST (VE6)

Mondeo 2001 (10.2000-02.2007)

Intake Air Distribution and Filtering - Charge Air Cooler—2.0L Duratorq-Di/TDDi (Puma) Diesel/2.0L Duratorq-TDCi (Puma) Diesel/2.2L Duratorq-TDCi (Puma) Diesel Mondeo 2001 (10/2000-02/2007)
Removal and Installation

Removal

  1. Remove the front bumper. For additional information, refer to Section  501-19 Bumpers.

  1. Disconnect the charge air cooler intake pipe from the charge air cooler.

  1. Disconnect the charge air cooler outlet pipe from the charge air cooler.

  1. Remove the charge air cooler retaining bolts.

  1. Remove the charge air cooler.
    1. Move the charge air cooler upwards.
    1. Remove the charge air cooler.

Installation

  1. NOTE:
    NOTE:Make sure the charge air cooler hoses are not split or cracked and are free of grease and contaminants.
    To install, reverse the removal procedure.

303-13 Evaporative Emissions > < Air Cleaner Intake Pipe - 3.0L Duratec-ST (VE6)