Raise and support the vehicle. For additional information, refer to: (100-02 Jacking and Lifting)
Jacking (Description and Operation),
Lifting (Description and Operation).
NOTE:If an internal transaxle concern is suspected, drain the fluid through a paper filter. A small amount of metal or friction particles may be found from normal wear. However, if excessive metal or friction particles are present, a detailed inspection of the transaxle will be required.
Drain the transaxle.
Allow the fluid to drain into a suitable container.
Discard the drain plug seal.
NOTE:Install a new drain plug seal.
NOTE:Clean the drain plug thread.
Install the drain plug.
Lower the vehicle.
Fill the transaxle with automatic transmission fluid . For additional information, refer to: Specifications (307-01B Automatic Transmission/Transaxle - Vehicles With: 5-Speed Automatic Transmission (5F31J), Specifications).
Install the transaxle oil filler tube plug.
Check the transmission fluid level. For additional information, refer to: Transmission Fluid Level Check (307-01B Automatic Transmission/Transaxle - Vehicles With: 5-Speed Automatic Transmission (5F31J), General Procedures).