Disassemble the rear seat backrest. For additional information, refer to Section 501-10 Seating.
Lock the rear seat backrest latch.
NOTE:Note the backrest latch cable position on the safety belt retractor to aid installation.
Detach the backrest latch cable from the safety belt retractor.
Using a suitable knife, cut the rear seat backrest carpet to access the safety belt retractor retaining bolt.
Remove the rear center safety belt retractor.
Feed the safety belt webbing and safety belt buckle through the guide loop.
Installation
CAUTION:Check the backrest latch cable routing, and the operation of the safety belt retractor and interlock before fully assembling the rear seat backrest.
NOTE:Reinstall the self-adhesive backrest carpet to give the necessary finish.