Removal and Installation Special Tool(s) | 204-226 Remover, Halfshaft | | 204-226-01 Adapter for 204-266 | | 204-349 Protector Set, Ball Joint Gaiter | | 204-605 Separator, Lower arm-ball joint | | 204-607 Remover, Ball joint | | 204-609 Protection Cap, Ball Joint Gaiter | | 205-047 Slide Hammer | | 205-775 Protector Halfshaft Seal | Removal All vehicles | -
Remove the left-hand front wheel. Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation). | Vehicles with high intensity discharge headlamps All vehicles | -
-
Loosen the nut two turns. | Vehicles with 1.8L or 2.0L engine Vehicles with 2.5L engine Installation All vehicles | -
NOTE:Make sure that a new component is installed. | | -
WARNING:Make sure that a new bolt is installed. Using the halfshaft bolt, connect the halfshaft to the wheel hub. Torque: 20 Nm | Vehicles with high intensity discharge headlamps All vehicles | -
Torque: Stage 1: 45 Nm Stage 2: 80° | | -
Install the left-hand front wheel. Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation). | |