Disassembly Special Tool(s) | 100-010 Remover, O-Ring Seal | | 205-072 Universal Flange Holding Wrench | | 205-072-01 Adapter for 205-072 | | 205-072-02 Adapter for 205-072 | | 303-293 Remover, Crankshaft Seal | | 303-699 Wrench, Oil Filter | | -
CAUTION:Only rotate the crankshaft clockwise. Rotate the crankshaft until piston No. 1 is approximately 45 degrees before top dead center (TDC). | | -
CAUTION:Use an open-ended wrench to hold the camshafts by the hexagon to prevent the camshafts from turning. | | -
CAUTION:Note the position of each component before removal. | | -
Discard the cylinder head bolts. | | -
NOTE:The seal is to be reused unless damaged. | | -
Discard the friction washer. | | |