Removal and Installation Special Tool(s) | 303-037 Installer, Valve Stem Seal | | 303-060 Compressor, Valve Spring | | 303-060-05 Adapter for 303-060 | | 303-362 Installer, Valve Stem Collets | | 303-390 Pliers, Valve Stem Seal | Materials Name Specification Engine Oil - 5W-30 WSS-M2C912-A1 Removal NOTE:Removal steps in this procedure may contain installation details. | -
Remove the camshaft. Refer to: Camshaft (303-01C Engine - 1.8L Duratorq-TDCi (Kent) Diesel, Removal and Installation). -
Position the apropriate piston at top dead center (TDC). | Installation NOTE:Cover the collet grooves with adhesive tape during installation of the valve stem seals. | -
Coat the valve stem seals with clean engine oil. -
-
To install, reverse the removal procedure. | | |