ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
303-08F Engine Emission Control - 2.2L Duratorq-TDCi (DW) Diesel > < Exhaust Gas Recirculation (EGR) Cooler

Mondeo 2007.5 (02.2007-)

Engine Emission Control - 2.0L Duratorq-TDCi (DW) Diesel - Exhaust Manifold to Exhaust Gas Recirculation (EGR) Valve Tube Mondeo 2007.5 (02/2007-)
Removal and Installation

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.

  1. NOTE:
    NOTE:Note the orientation of the clamp to aid installation.
    NOTE:
    NOTE:The gaskets are to be reused unless damaged.
    1. Torque: 5 Nm
    1. Torque: 10 Nm
    1. Discard the clamp.
    1. Torque: 10 Nm

Installation

  1. NOTE:
    NOTE:Make sure that a new clamp is installed.
    NOTE:
    NOTE:Make sure that the clamp is installed to the same orientation as when removed.
    To install, reverse the removal procedure.

303-08F Engine Emission Control - 2.2L Duratorq-TDCi (DW) Diesel > < Exhaust Gas Recirculation (EGR) Cooler