Removal and Installation Special Tool(s) | 308-554 Remover/Installer, Clutch Master Cylinder | Materials Name Specification Grease WSD-M1C230-A Removal NOTE:Removal steps in this procedure may contain installation details. Information Not Found Installation | -
Coat the clutch master cylinder gaiter with grease before installing. | | -
To install, reverse removal procedure | | -
Refer to: Clutch System Bleeding (308-00 Manual Transmission/Transaxle and Clutch - General Information, General Procedures). | | -
Refer to: Door Window Motor Initialization (501-11 Glass, Frames and Mechanisms, General Procedures). | | |