ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
310-02 Acceleration Control > < Fuel Pump and Sender Unit - 1.6L Duratec-16V Ti-VCT (Sigma)-2.0L Duratec-HE (MI4)-2.3L Duratec-HE (MI4)-2.5L Duratec (VI5)

Mondeo 2007.5 (02.2007-)

Fuel Tank and Lines - Fuel Level Sensor—1.8L Duratorq-TDCi (Lynx) Diesel/2.0L Duratorq-TDCi (DW) Diesel Mondeo 2007.5 (02/2007-)
Removal and Installation

Special Tool(s)
310-069
Wrench, Fuel Tank Sender Unit

Removal

WARNING:
WARNING:Refer to: Diesel Fuel System Health and Safety Precautions (100-00, Description and Operation).
NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Remove the fuel tank.
    Refer to: Fuel Tank (310-01A, Removal and Installation).

  1. Refer to: Quick Release Coupling (310-00, General Procedures).

  1. Special Tool(s): 310-069
    Torque: 85 Nm

  1. CAUTION:
    CAUTION:Take extra care not to damage the fuel tank level sensor float and arm.

Installation
  1. CAUTION:
    CAUTION:Take extra care not to damage the fuel tank level sensor float and arm.
    NOTE:
    NOTE:Make sure that the seal is correctly located.
    NOTE:
    NOTE:Make sure that the installation marks are aligned.
  1. To install, reverse the removal procedure.

310-02 Acceleration Control > < Fuel Pump and Sender Unit - 1.6L Duratec-16V Ti-VCT (Sigma)-2.0L Duratec-HE (MI4)-2.3L Duratec-HE (MI4)-2.5L Duratec (VI5)