ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fuel Filter - 1.6L Duratec-16V Ti-VCT (Sigma)-2.0L Duratec-HE (MI4)-2.3L Duratec-HE (MI4)-2.5L Duratec (VI5) > < Fuel Tank
Fuel Tank and Lines - Fuel Tank Filler Pipe Mondeo 2007.5 (02/2007-)
Removal and Installation

Removal

WARNING:
WARNING:Refer to: Petrol Fuel System Health and Safety Precautions (100-00, Description and Operation) / Diesel Fuel System Health and Safety Precautions (100-00, Description and Operation).
NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Drain the fuel tank.
    Refer to: Fuel Tank Draining (310-00, General Procedures).
  1. Remove the right-hand rear wheel and tire.
    Refer to: Wheel and Tire (204-04, Removal and Installation).

  1. Torque: 10 Nm

  1. NOTE:
    NOTE:Note the orientation of the clamp to aid installation.
    1. Torque: 10 Nm
    1. Discard the fuel tank filler pipe clamp.

Installation

NOTE:
NOTE:Make sure that a new clamp is installed.
NOTE:
NOTE:Make sure that the clamp is installed to the same orientation as when removed.
  1. To install, reverse the removal procedure.

Fuel Filter - 1.6L Duratec-16V Ti-VCT (Sigma)-2.0L Duratec-HE (MI4)-2.3L Duratec-HE (MI4)-2.5L Duratec (VI5) > < Fuel Tank