Mustang V6-4.0L (2008)
3. Install the LH cassette upper bolt.
^
Tighten to 19 Nm (14 lb-ft).
4. Position the power steering pump and install the 3 bolts.
^
Tighten to 25 Nm (18 lb-ft).
5. Install the power steering pump pulley and the 3 bolts.
^
Tighten to 25 Nm (18 lb-ft).
6. Install the PSP tube bracket nut.
^
Tighten to 7 Nm (62 lb-in).
7. Install the suction hose bracket bolt.
^
Tighten to 8 Nm (71 lb-in).
8. Install the primary chain and sprockets as an assembly.
9. Install the jackshaft chain tensioner and the 2 bolts.
^
Tighten to 9 Nm (80 lb-in).
