Mustang V6-4.0L (2008)
All vehicles
6. Remove the lower radiator air deflector.
7. Remove the condenser outlet fitting nut and disconnect the fitting.
-
Discard the O-ring seal.
-
To install, tighten to 8 Nm (71 lb-in).
8. Remove the 2 cooler line bracket nuts and position the cooler line aside.
9. Remove the condenser core.
10. To install, reverse the removal procedure.
-
Install new O-ring seals.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
11. Evacuate, leak test and charge the refrigerant system.