Mustang V8-4.6L SC VIN Y (2004)
Valve Body: Service and Repair
Special Tools And Equipment
Special Tool(s)
Removal
1. Drain transmission fluid and remove the transmission fluid pan and filter.
2. CAUTION: Do not pull on the molded lead frame. This may cause damage to the connector ends. Carefully pry up on the locking tabs to
disconnect the solenoids. Disconnect the molded lead frame from the solenoids.
Disconnect the molded lead frame from the solenoids.
1
Disconnect the shift solenoid SSA and SSB.
2
Disconnect the Torque Converter Clutch (TCC).
3
Disconnect the Electronic Pressure Control (EPC) solenoid.
4
Disconnect the bulkhead inter-connector.
3. Remove the manual control valve detent lever spring.
1
Remove the bolt.