Mustang V8-4.6L VIN H (2005)
Position the OCS to the seat cushion frame.
-
Feed the hose, pressure sensor, wire harness, electrical connector and the ECU through the seat cushion pan assembly.
2. NOTE: Make sure the ECU is properly secured to the bracket.
Position the ECU onto the seat cushion pan bracket and install new rivets.
3. Bend the retaining tab back on the pressure sensor bracket.
Seats with a service kit OCS
4. Install the seat track assembly and the 4 nuts (2 rear nuts shown), and center the OCS service kit on the seat cushion pan.
-
Tighten to 36 Nm (27 lb-ft).
Seats with a production OCS
