Mustang V8-5.4L SC (2008)
2.
Top latch dowel pins do not align with header latch bracket. (Figure 2)
NOTE
IF THE LATCH DOWEL PINS ALIGN WITH THE LATCH BRACKET, BUT ARE TOO FAR FROM THE WINDSHIELD HEADER TO
CLOSE EASILY, THEN TRY RELAXING THE MATERIAL PRIOR TO REPLACING ANYTHING. TO RELAX THE MATERIAL, CLOSE
AND LATCH THE TOP, AND PUT VEHICLE IN PAINT BOOTH OVEN WITH HEAT ON FOR A COUPLE HOURS.
3.
Top number 1 bow clearance to top well in the body is uneven. (Figure 3)
4.
Side window seals do not align properly to side glass. (Figure 4)
Replace Top Assembly:
