Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
CONTROL INSTALLATION
1. Route parking brake cable and equalizer around control assembly pulley. Insert cable anchor pin in pivot hole in ratchet.
2. Connect parking brake rear cable and conduits to parking brake cable and equalizer.
3. With parking brake rear cable and conduits attached, position parking brake control assembly on floorpan. Install retaining bolts. Tighten to 14-21
Nm (11-15 ft. lbs.).
WARNING: KEEP FINGERS CLEAR OF PARKING BRAKE CONTROL ASSEMBLY TO PREVENT INJURY.
4. From under the vehicle, pull parking brake cable and equalizer rearward to rotate self-adjuster reel backward and remove lock pin.
5. Apply and release parking brake control several times. Make sure parking brakes apply and release and BRAKE warning indicator lights when
brakes are applied.
6. Install console top panel.