Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
Fig. 18 Camshaft Positioning Tool Installation
5. Install Camshaft Positioning Tool T93P-6256-A in rear D-slots of camshafts as shown.
CAUTION: Failure to use Camshaft Holding Tool T93P-6256-AH while assembling or disassembling timing chains will result in damage to
D-slots or Camshaft Positioning Tool T93P-6256-A.
Fig. 24 Camshaft Holding Tool
6. Install Camshaft Holding Tool T93P-6256-AH onto camshafts as shown to keep camshafts from rotating and to prevent deformation of Camshaft
Positioning Tool T93P-6256-A.
