Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
10. Index and install first speed outer blocker ring.
NOTE:
^
Align triangular marker on outer blocker ring with arrow on synchronizer.
^
Soak blocker ring in MERCON(r) Multi-Purpose (ATF) Transmission Fluid XT-2-QDX or equivalent for ten minutes prior to installation.
11. Install first speed middle blocker ring as shown.
NOTE:
^
Tabs on middle blocker ring must face up.
^
Soak blocker ring in MERCON(r) Multi-Purpose (ATF) Transmission Fluid XT-2-QDX or equivalent for ten minutes prior to installation.
12. Install first and second gear synchronizer inner cone as shown.