Mustang Cobra V8-4.6L DOHC VIN V (2000)
2.
Position the rear door scuff plate(s) away from the lower quarter trim panel. See Figure 16.
3.
Position the quarter trim panel(s) away from the quarter panel. See Figure 16.
4.
Remove the rear seat safety belt lower anchor bolt(s). See Figure 16.
5.
Remove the lower quarter trim panel(s).
6.
Position the upper quarter trim panel(s) as shown in Figure 17.
7.
Remove the safety belt upper anchor bolt(s), then remove the upper quarter trim panel(s). See Figure 17.
