Mustang GT V8-4.6L SOHC VIN X (1998)
7. CAUTION: If installing a new filter, and grommet remains in the main control bore, carefully use a small screwdriver to remove the grommet.
Use care not to damage the main control bore.
NOTE: If transmission is being serviced for a contamination-related failure, use a new filter and grommet. The filter may be reused if no
excessive contamination is present.
Using both hands, remove filter by pulling downward.
8. Remove two bolts retaining digital Transmission Range (TR) sensor to case. Remove Transmission Range (TR) sensor from manual control lever.
9. Remove one bolt retaining manual control valve detent lever spring to the main control valve body.